The vast experience of Huzur in the construction of Fancy Chenille Yarn Machines, as well as the latest developments in the fields of technology have enabled to design update Modern Razor Blade Chenille Cutting Machine for the high quality chenille yarn production. By this machine it is provide to maximum efficiency with minimum maintanance and operator support.
Yarn Displacement Unit / Yarn Break Switch
It’s designed as optional to avoid wearing the muffs. Base yarns move as transverse in order to hinder corrosion of rubber. So base yarns to continue move on same tension.
Yarn Break Switches are controlled to prevent defective production. When yarn snaps, these switches stop running of the head automatically.
High Speed Head / Opening Ankle System
High quality yarn production, silent operation and low vibration are obtained thanks to this special designed head which increase its speed to 18.000 rpm.
Thanks to Opening Ankle System drivers can be adjusted when the machine is in operation. While adjust drivers pressure adjustment to provide longer life for caliber, razor and drivers.
Yarn Guides / Balloon Breaker
Yarn Guides provide to quality and efficiency twisting thanks to lubrication ring and yarn guards.
According to ring frame moving Balloon Breaker moves up or down. In case the yarn winding to bobin on same tension during every steps of production.
Each two spindles are controlled by one motor in order to provide more efficiency and high quality. With new modern design, spindles, heads, twisting gearbox and blades moving speeds change easier while belt move between steps of pulley.
Tackles and Rings
The Ring Frame speed can adjust from Control Panel. Rings have diameters with 115 mm (special order 127 mm) Lubrication system has single canal. There are yarn guides in order to wrap properly in accordance with the movement of the tackle.
Creel Feed and Technical Specifications
Creel feed located beside the machine, designed to hold 2 cones for base yarns and 2 cones for effect yarns with a breaking system for each spindle.
MODEL : SL-2006 RAZOR BLADE CHENILLE CUTTING MACHINE
GAUGE : 180 mm
YARN PRODUCTION RANGE : 1 Nm – 10 Nm
SPINDLE NUMBER PER SECTION : 10
MAXIMUM SPINDLE NUMBER : 120
RING DIAMETER : 115-127 mm
SPINDLE DIAMETER : 50 mm
TUBE HEIGHT : 350 mm
MAXIMUM SPINDLE SPEED : 6.000 rpm
MAXIMUM EFFECT HEAD SPEED : 18.000 rpm
MAXIMUM YARN PRODUCTION SPEED : 12,7 mt / dak.
RING FRAME MOTOR : 0,55 Kw
SPINDLE MOTOR : 0,37 Kw
CONICAL MOTOR : 0,18 Kw